<- Back

Seismicity Risk in Oil and Gas Investments: What Investors Should Know

min
November 18, 2026

Seismicity risk in oil and gas is real but narrow. It comes mostly from one activity, the deep injection of produced wastewater, and it depends on a project’s geology, its operator and the rules of the state it sits in. For an accredited investor, the useful question is not whether oil and gas can cause earthquakes. It is whether the specific project you are considering has the exposure, and whether the operator manages it. Fieldvest presents vetted U.S. energy projects with their key materials side by side, so you can ask that question of each deal before you commit capital.

Fieldvest
fieldvest.com
Assess Seismicity in Each Project
Explore vetted U.S. energy projects and review their key materials to assess disposal arrangements, monitoring and permit conditions before investing.
Visit

TL;DR

  • Wastewater disposal, not hydraulic fracturing, is the main oil and gas activity tied to damaging induced earthquakes, according to the USGS.
  • A hazard becomes a risk only when people or property are exposed, so location, depth and distance from faults matter more than the headline.
  • Regulators such as the Texas Railroad Commission can modify, suspend or end disposal permits, which is the way seismicity most plausibly reaches a project’s cash flow.
  • Research on stock prices found market reactions to induced earthquakes were generally small, with a few exceptions.
  • Read the project materials for disposal arrangements, operator monitoring and permit conditions before you invest.

Table of Contents

What induced seismicity means, in plain terms

Induced seismicity means earthquakes caused by human activity rather than natural tectonic movement. In oil and gas, the trigger is a change in underground pressure. The U.S. Department of Energy describes three conditions that must all be present: an existing fault, stress that leaves that fault close to failure, and a stress change from injecting or withdrawing fluid.

The same DOE overview says earthquakes linked to oil and gas development can reach magnitude 3.0 to 6.0, and it names large-scale wastewater injection as a primary cause. Most are far smaller than that and are felt only by instruments.

There is a second distinction worth keeping. The National Academies separate hazard from risk: hazard is the potential for induced earthquakes, while risk requires the possibility of damage to structures or injury to people. An earthquake in empty, stable ground is a hazard. It becomes an investment risk when it touches operations, neighbors, regulators or insurance.

Which activities actually matter

Investors often lump every oil and gas operation together. The research does not.

Wastewater disposal

Oil and gas wells bring up large volumes of salty water along with the product. Operators commonly dispose of it by injecting it into deep wells. The Congressional Research Service says wastewater disposal is more strongly associated with potentially damaging earthquakes. The USGS explains why: disposal wells commonly run longer and inject more fluid than fracturing operations, so they raise pressure over longer periods and across broader areas.

The USGS also attributes the rise in central U.S. earthquakes primarily to disposal of oil-production waste fluids.

Hydraulic fracturing

Fracturing itself typically produces microseismicity. The CRS reports that these events are mostly below magnitude 1.0, although a few cases led directly to earthquakes larger than magnitude 2.0. For a project whose main activity is completing and producing wells, that is a smaller exposure than for a project that depends on a large disposal system.

Producing assets, development projects and infrastructure

The three kinds of deals on the Fieldvest platform carry the exposure differently. A producing asset has an established water-handling arrangement you can examine. A development project will need one as wells are drilled. Energy infrastructure, such as gathering or disposal-related assets, may sit closer to the question. The point is to ask where a project’s produced water goes and who controls that disposal.

Where it has been a problem

The pattern is concentrated, not nationwide. The CRS identifies Oklahoma, Texas, Arkansas, Ohio and Colorado among states where oil and gas activity has been linked to unusual seismic activity.

The USGS reports that central U.S. earthquakes of magnitude 3 or greater averaged 24 per year from 1973 to 2008, then 193 per year from 2009 to 2014, including 688 in 2014. The same publication points to damaging 2011 events: magnitude 5.6 near Prague, Oklahoma, magnitude 5.3 in Trinidad, Colorado, and magnitude 4.7 near Guy-Greenbrier, Arkansas.

Texas is the state most investors now ask about, because of the Permian Basin. The University of Texas at Austin’s 2024 biennial report says Texas seismicity is concentrated in seven areas, with about 88% in the Permian Basin and 9% in Eagle Ford. The same report records 184 Delaware Basin earthquakes of magnitude 3 or greater in 2022, 150 in 2023 and 100 in 2024. The count has been falling since 2022, which matches a period of tighter regulatory attention.

Texas seismicity concentration and earthquake counts

The practical reading: seismicity is a local question. Two wells in the same state can have very different exposure depending on the fault structure beneath them and the disposal activity around them.

How seismicity can reach a project’s economics

An earthquake rarely destroys a well. The more common channel is operational and regulatory: a pause in disposal, higher water-handling costs, or a delay.

A peer-reviewed 2021 study, Movers and Shakers, lists the ways induced seismicity may affect a company: operations, expected costs and revenues, timing, reputation and cash flows, with repair costs and changes to the extraction period also able to affect value. The same study found the market responses were generally economically insignificant, with only a few exceptions. Around some Oklahoma events it found statistically significant but small and short-lived moves for two large producers, and the authors caution that this does not show either company caused those earthquakes.

For a private investor in a single project, the stock-market evidence is context, not a forecast. What it shows is that seismicity is something companies absorb in the ordinary course of business. If you want a sense of how listed energy companies’ stated plans compare with what they deliver, the sector benchmarks for energy companies give a public-records view of that gap.

Regulation is the main transmission channel

Texas shows how it works. The Railroad Commission’s seismicity response page says it may modify, suspend or terminate saltwater-disposal permits when injection is likely to be, or is determined to be, contributing to seismic activity. It suspended 23 deep-disposal permits in Northern Culberson-Reeves effective January 12, 2024.

Before a permit is issued, the Commission’s seismicity review rules require a historical seismic-event survey around a proposed well: a radius of 5.64 miles for shallow wells and 15.53 miles for deep wells. A catalog event of magnitude 2.0 or greater in that area triggers a seismicity review and additional geologic information. Amendments tied to 2025 Senate Bill 1150 have been proposed for public comment, so check that page for their current status rather than assuming they are in force.

In February 2023 the Commission also issued a notice on monitoring and reporting. Certain new deep Permian disposal wells, and shallow wells in designated seismic response areas, would have bottomhole-pressure monitoring and monthly reporting of daily injection data. Other new Permian wells permitted for at least 5,000 barrels per day carried reporting conditions as well.

For you, the lesson is that disposal capacity is a permitted, supervised asset. A project whose water plan is well documented and sits inside a clear permit framework is a different proposition from one that leaves the question open.

Regulation is the main transmission channel

What shapes the risk at a specific project

The DOE says injection-related risk depends on distance from a fault, the permeability of the surrounding rock, and the volume and rate of injection. It adds that reducing the injected water and the injection period can manage risk in some cases. Those four factors translate into questions you can put to any project.

Factor What to look for in the project materials
Location The basin, the county and any state-designated seismic response area nearby
Water handling Where produced water goes: on-site disposal, a third-party well or recycling
Volume and rate Expected barrels of water per day over the life of the project
Monitoring Whether injection data and pressure are tracked and reported
Permits The status of any disposal permit the project relies on
Contingency Cost and options if disposal is restricted or capacity moves

Not every deal will answer every row. A producing asset with years of operating history will have more to show than a new development project, and that is part of how you weigh one against the other. Our guides on reading an oil project prospectus and the energy project evaluation framework walk through where these answers usually sit in the documents.

A worked example

Suppose you are comparing two development projects, each projected to produce a similar amount of oil in its first years.

Project A is in an area with no recent seismic events in the catalog. Its produced water is handled by a disposal well that is already permitted, with monitoring in place.

Project B is in a county near a designated seismic response area. It plans to rely on a new deep disposal well that has not been permitted yet.

Neither is disqualified, but they are not the same deal. Project B’s schedule and water costs depend on a permit decision, so its timing risk is higher. You would want the operator’s water plan, a backup option and the cost impact if disposal capacity is cut. Project A’s seismic exposure is lower, so your attention can go to other parts of the economics.

Where seismicity sits among other risks

If you came here from a tax conversation, keep proportion. Oil and gas investments carry commodity price risk, operator risk, depletion and drilling results, and seismicity is one operational and regulatory factor among them. Our risk management guide for energy investing and the piece on risk mitigation steps for oil projects place it alongside the others, and the top pitfalls for energy investors list what tends to go wrong when these factors are skipped.

Two of those factors interact with seismicity directly. Water handling affects operating costs, which feeds into the numbers in a projected ROI analysis. And any restriction that slows production changes the shape of the decline curve described in our model of oil depletion effects on deal value.

Insurance and liability: what the courts have said

Homeowners in earthquake-affected areas have tried to recover costs even without damage. In 2019 the Tenth Circuit affirmed dismissal of Oklahoma homeowners’ claims for higher earthquake-insurance premiums where they alleged no actual damage to persons or property. The court held Oklahoma law did not allow recovery of those premiums on the pleaded facts.

This matters to you only as a sign of how liability is framed: it follows demonstrated damage. If a project’s operator carries appropriate insurance and manages its water responsibly, that framing is where you want to be. For questions about liability in a specific structure, speak to your attorney before you sign.

How Fieldvest approaches the evaluation

Fieldvest connects accredited investors with U.S. oil and gas operators and lists producing assets, development projects and energy infrastructure. Our approach is built on deeper due diligence with vetted and screened operators, and on presenting key project materials in a streamlined way so you can compare deals on the same footing. That comparison is where a seismicity question belongs: put each project’s location, water plan and permits next to the others.

If you are weighing these projects for their first-year tax deductions, the Free Oil & Gas Tax Deduction Calculator shows what a deduction could mean against your income, and our overview of private oil investments, tax and cash flow explains how the benefits work. For the wider picture, our guide to oil and gas investments for accredited investors is the place to start.

Our view on seismicity

We hear this question from investors who have read a headline about earthquakes in Oklahoma or West Texas and wonder whether it applies to them. Our answer is to separate the activity from the place.

The evidence says the exposure comes mainly from large-scale wastewater injection, and that regulators are actively supervising it. That is a manageable, diligence-friendly risk. It points you to concrete things to read: where a project is, how its water is handled and what permits it depends on.

This is why we built Fieldvest around vetted and screened operators and a consistent presentation of project materials. When every deal shows its key facts in the same way, a question like seismicity becomes one more line to compare, not a reason to guess.

For accredited investors who want a large first-year deduction and long-term energy income, direct ownership in real U.S. energy assets remains a sound way to pursue both, and a clear-eyed look at operating risk is part of doing it well.

Sharif

Browse vetted U.S. energy projects

Fieldvest gives accredited investors access to private energy deals across three categories: producing assets, development projects and energy infrastructure. Each deal comes with its key project materials presented so you can compare them, along with portfolio management tools and ongoing investment support.

Fieldvest

You can see the current projects on the Fieldvest platform. Offers are shown there with their terms, and you can review them against the questions above.

FAQ

Does fracking cause earthquakes?

Usually it causes only microseismicity, mostly below magnitude 1.0, according to the CRS. A few cases led directly to earthquakes larger than magnitude 2.0. The USGS says most induced earthquakes are not directly caused by fracking and ties the central U.S. increase mainly to wastewater disposal.

Can an earthquake wipe out an oil and gas investment?

The documented channels are narrower than that. Seismicity can affect operations, costs, timing and cash flows, and regulators can restrict disposal permits. A 2021 study of stock-market reactions found them generally economically insignificant, with only a few exceptions. The effect on a private project depends on its location, water plan and permits.

Which states have the most induced seismicity concern?

The CRS names Oklahoma, Texas, Arkansas, Ohio and Colorado among the states with oil and gas activity linked to unusual seismic activity. In Texas, UT Austin’s 2024 report puts about 88% of the state’s seismicity in the Permian Basin and 9% in Eagle Ford. Exposure still varies from one location to the next.

What should I read in a project’s materials about seismicity?

Look at the location and any nearby seismic response area, where produced water goes, expected injection volumes, monitoring and the status of disposal permits. Those track the factors the DOE says drive injection-related risk: fault distance, rock permeability, and injection volume and rate. Our prospectus guide shows where to find them.

Sources

Ask Fieldvest
Invest Now ->